Free Energy Devices

Balancing control of energy impacts how communities are built and maintained

Nourishment Principle: establishing choices and cultural character by determining how community uses power to develop and regulate stability.
Post Reply
golly
Site Admin
Posts: 291
Joined: Mon Oct 29, 2018 11:14 am
Location: Hohokam / Piipaash / Apache / O'odham / Pueblo / Mexico / Arizona

Gender

Skin

Sexuality

Belief

Political

Free Energy Devices

Post by golly »

I thought it would be interesting to talk about free energy devices in an open way and collect any plans that seem to be circulating around the Internet, because it seems there could be something very important in them.

There are several moral questions we face when analyzing what it would mean for the general public to actually possess the means (with or without cooperation from manufacturers or distributors, by peaceful or violent means) of producing an infinite supply of electrical power to any variety of tools. Of course, if we have infinite power to charge short-lived batteries for a power drill for example, it seems a kind of weird irony, but I am sure sometimes people would want to use it for that purpose indeed. The convenience of cordless would slow down the technological advancement of shrinking free energy devices to be in every flashlight, phone, or perhaps even toasters and television monitors. However, there is a less useful and more threatening side that we face and that is the power of a laser weapon or something else that military or State security personnel are undoubtedly concerned with.

The reasons I don't think that's too much of a concern yet are because:
1. There appears to be some kind of concerted effort to suppress free energy devices on a daily basis.
2. The free energy devices I have seen plans for or heard of involve large boxes for motors or engines, and they are not easily transported in a way that threatens public transportation or anything like that.

So with that said, let's tune into our positive thinking, our optimism, and channel our best selves and see if we cannot create a resource in this topic for those wanting to explore the plans available.

If nothing else (and I don't know how you feel about Steven Greer and his Sirius Disclosure project but) there is his inspiring proposal here:

CONCEPT AND PROPOSAL

DRAFT 1.0

STEVEN M. GREER MD


CONCEPT
For over 100 years, advances in electromagnetic systems have allowed for the creation of over-unity (more out-put than manmade input) power generation via the zero point energy (ZPE) field and quantum vacuum. These have been suppressed by way of a number of means both legal and illegal. To date, no inventor, corporation, research team or university has been able to surmount these obstacles. (See The Orion Project and The Disclosure Project)

Since neither the governments of the world nor major corporations have moved decisively towards disclosing these technologies, a new private consortium is needed to achieve this goal.

Much like the Internet developed by DARPA, this consortium would develop a basic new energy technology that could then be adapted in countless ways to provide usable power that is clean, limitless, safe and essentially free.

In this sense, we are stepping in where large governmental and corporate programs have failed. The need is urgent and the time is short.

Those providing funding will be able to do good by doing well: There are thousands of applications for this technology that can be monetized via products that can subsequently be patented and sold. But the underlying technology, like the Internet, must be open-source, freely available and massively disclosed in real time.

We need to think big: The Earth has 7.2 billion people, nearly 1 billon motor vehicles and a billion or more homes and businesses- all of which need power. The zero-sum game of secrecy and patents that dominate most technology start-up efforts is the wrong approach, and they have failed spectacularly in the past when ZPE is involved. We must not repeat those errors.

For this reason a new and creative approach is needed.

We propose a radically new Research and Development project that incorporates the following interlocking strategies:

A Multi-centered R and D Project that is connected via the Internet in real time to share results, EM frequencies, materials, problem solve, etc.
Open Source – No Intellectual Property (IP) or Patents will be pursued at this time, thus allowing for open sharing and feedback from the research community . There can be no hold-backs: all developments, circuits, and operational breakthroughs will be shared in real time with the public and other researchers

Live-Streamed: All labs will be 24/7/365 live streamed so that the public will be invested in the process, share in the results, successes and setbacks. Any attempt to suppress a breakthrough will be neutralized by this and the Open Source policy

A massive PR, multi-media public education effort must be launched that runs simultaneously with the R and D effort so that public consciousness is raised and made ready to rapidly accept and adapt this new energy paradigm. (This needs to include PR/News, Documentaries, Movies based on a true story -no science fiction-and mass social media networking.) Any radical new technology needs an equally transformative media and educational effort for the public, and not just for scientists and policy wonks.

OBJECTIVE
Our chief objective is to create a robust multi- KW over-unity device adequate to run a home, business or car. The ideal system would be solid state (no moving parts) using readily available components that are cost effective. Radioactive, hazardous and potentially dangerous materials will be avoided.

During Phase I of the project, we will NOT be pursuing electromagneto-gravitic (EMG) or gravity control systems as these pose a legitimate military and national security risk at this time. All EMG systems can easily be made into missile delivery and intercept systems that are inherently dangerous given current global geo-political realities.

The basic science research, including confirmed EM frequencies and voltages, key materials and operational plans will be openly shared with the public and the scientific community for independent verification and reproducibility- and also with the media.

Our Objective is to have a fully functioning robust prototype within 2 years that would effectively replace the need for all oil, gas, coal, nuclear power, wind hydroelectric, geo-thermal and solar energy systems currently used on Earth.

Transitional Technologies that convert existing fossil fuel internal combustion engines and the like will also be developed (such as the Stan Myer water fuel cell).

FUNDING
Funding can come from either a consortium of VC / Angel sources or one source. Frankly, the less funding there is committed to the effort, the riskier it becomes. Under-capitalizing such an effort leaves it vulnerable to failure on multiple fronts.

An initial budget in the $100 Million- 200 million would ensure success on both the technological, strategic and PR fronts. While the project could succeed with less, it becomes riskier the less capitalized it becomes. Every energy and macro-economic special interest on earth will endeavor to undermine this project, and we should be prepared.

The media component could easily begin a substantial ROI- one break-out feature- film based on a true story on this subject could very well exceed the entire budget needs and ongoing costs.

GOVERNANCE
A Board should be created to guide to project, but ultimately each lab needs a director with solid scientific and management credentials- and much latitude to pursue creative ideas.

Strategically, there needs to be a controlling legal authority that adheres to the central tenets outlined above: Multi-centered, real-time sharing of data and results, full transparency, live-streaming inclusion of the public and massive PR and public education.

Any attempt to alter or subvert the open-source, mass PR and live-streaming approach outlined above would almost certainly result in failure and probably prove fatal for those involved. Past efforts using trade secrets, multiple patents dividing the IP into allegedly hidden technologies, and efforts to be “discreet and quiet” have all failed. We have many examples (recent ones) of fatal strategic errors being made by well-funded but misguided efforts. Covert projects and their corporate masters own secrecy and the night; we must own the light of transparency and disclosure.

Governance would require that these policies be permanently enshrined in the governing documents, articles of incorporation and other formal organizational papers. Any attempt to by any party to keep secret the research and findings must result in the removal of the offending party- even if it is a major funding source or central scientist or researcher.

The Earth, if we are lucky, may have the 20 years needed to develop this new energy technology, productize it and get it into widespread use globally. By 2036, all transportation, power generation and energy use needs to be from this source. If a fully functioning ZPE system was disclosed today, there is barely time: The lead-time on replacing heavy infrastructure, auto and truck engines and the like is very long and capital intensive. Inventory turnover for durable and heavy industrial equipment is 15-30 years. We are virtually out of time already.

The good news is the Earth is a living, self-healing biosphere that is amazingly resilient once humanity stops abusing her.

Damage already done to the earth over the past 150 years of industrialization can be rapidly repaired; many of these new energy technologies can be deployed to specifically clean up chemical and radioactive waste (See Ken Shoulders charged cluster system). When energy costs drop to effectively zero, recycling can approach 100%.

Ultimately, an overall Project Director is needed that will be able to ensure the strategic safety and success of the project. Staffing will prove to be the biggest challenge- another reason why from it’s inception, the Fund must be publicly announced with a professional and massive PR campaign- even before the first lab is stood-up.

If we come together to achieve this great goal for humanity and the earth, we may, in our lifetimes behold a new civilization on earth that can live in harmony with nature and be sustainable for thousands of years.
https://siriusdisclosure.com/energy/the ... ator-fund/

golly
Site Admin
Posts: 291
Joined: Mon Oct 29, 2018 11:14 am
Location: Hohokam / Piipaash / Apache / O'odham / Pueblo / Mexico / Arizona

Gender

Skin

Sexuality

Belief

Political

QEG manual

Post by golly »

Here is a free energy device article cited as from 2014:
QEG_title_cover.png
QEG_title_cover.png (343.81 KiB) Viewed 1049 times
QEG SYSTEM DESCRIPTION . . . . . . . . . 3-25-2014

The Quantum Electric Generator system (QEG) is an adaptation of one of Nikola Tesla’s many patented electrical generator / dynamo / alternator designs. The particular patent referenced is No. 511,916, titled simply “Electric Generator”, and dated January 2, 1894 (see back of this manual). The adaptation is a conversion from a linear system, to a rotary system.

The QEG prototype is scaled to produce electrical power in the range of 10-15 kW (kilowatts) continuously, and can be set up to provide either 120 Volt or 230-240 Volt single phase output. We are also planning future designs to provide 3-phase power.

Service life of the device is limited only by certain replaceable components, such as bearings, v-belts, and capacitors. The basic machine should operate trouble-free (with minimal maintenance) for as long as any good quality electro-mechanical appliance, such as a quality washing machine or refrigerator. Heavy-duty mechanical components are used throughout for reliability.

The QEG is not a complicated device, as it is designed (like Tesla’s other ‘discoveries’), to work in harmony with natural laws, rather than with the power-wasting symmetric motor and generator designs used in today’s mainstream industry.

An effective way to understand the operating principle of the QEG is to think of it as a high-powered, self-resonant oscillator (a power tank circuit), which generates high-voltage AC (15 to 25kV). These HV oscillations are then transformed into line voltage AC output, at current levels up to approximately 85 A. In today’s alternative energy terminology, it would be called a type of resonance machine.

The circuitry that develops high power in this device is really based on an existing but under-utilized power oscillator configuration, however, the ‘quantum’ part of the design has to do with how the generator output is tuned for maximum power. Conventional alternators (AC generators) consume more input power than the output power they provide. For example, one brand of power take off (PTO) alternator uses 18,000 watts (24 horsepower) to develop 13,000 watts of output power. In the QEG, input power is used only to maintain resonance in the core, which uses a small fraction of the output power (under 1000 watts to produce 10,000 watts), and once running, the QEG provides this power to its own 1 horsepower motor. This is known as over-unity. Once the machine builds up to the resonant frequency, it powers itself (self-running).

In the QEG, the exciter coil is used to provide a conduction path through the quantum field (zero point) into the generator core. This has the effect of polarizing the core, which increases power output over time.

James M. Robitaille

NOTICE TO BE READ AND UNDERSTOOD BY ALL QEG PROJECT CREWS

Fix the World (FTW) is not responsible for the actions of others. We can only tell you our experience. We have discovered it is essential that those wishing to build a QEG use careful thinking, patience, and consideration for the greater good.

The inhabitants of planet Earth are entering into a new paradigm and a new way of doing business. In honor of Nikola Tesla, the QEG is a gift freely given to the world, and FTW’s involvement is strictly altruistic.

The QEG is an electromechanical device and as such, safety for the individual and end user should always be of prime concern. It is therefore essential that persons assembling the device are experienced in the field of electro-mechanical assembly. A considerable level of knowledge in quantum physics is also required.

IF YOU ARE TRAINED IN TRADITIONAL PHYSICS, AND HAVE NOT BEEN DOING THIS WORK FOR MANY YEARS, YOU MUST FIRST DO YOUR RESEARCH ON BASIC QUANTUM ENERGY DEVICES AND HOW THEY WORK (e.g. resonance and tuning).

Electrical / Mechanical devices are inherently dangerous. Electrical shock hazards can cause serious injury and in some cases death. Mechanical hazards can result in dismemberment and in some cases death.

Due diligence has been applied to ensure that the QEG instructions are complete and correct. All local and country-specific electrical and mechanical code implications, by which a QEG might be installed and operated, cannot possibly be known. Nor is it conceivable that any and all possible
hazards and/or results of each procedure or method have been accounted for.

It is for these reasons that the QEG must be either directly installed or supervised by an experienced electromechanical engineer to ensure the installation is done safely and in accordance with local electrical code, however, the QEG is installed the same way as any commercial generator and does not violate any electrical codes. Anyone who uses the QEG installation instructions (including but not limited to any procedure or method of installation) must first satisfy themselves that neither their safety, nor the safety of the end user, will be endangered over the course of the installation and operation of the QEG.

It is imperative to understand YOU NEED PROFESSIONALS AND EXPERT ADVICE to build a QEG.The installation instructions are designed to show how we have found the building of the device to be accomplished, and any negative outcomes that result are completely the responsibility of the person/company building it; FTW provides no guarantee for the successful installation of the QEG.

This notice serves the purpose of communicating the serious nature of building a quantum machine, as we are well aware that there have been severe restrictive agencies involved with their suppression. Quantum free energy isn’t taught at University and most designers have heretofore been unsuccessful at mass distribution. It is YOUR RESPONSIBILITY therefore to make certain you are building the QEG with positive intentions for humanity, and lashing out legally or otherwise to FTW, HopeGirl and/or the designer and his family, is a violation of goodwill and will in no way be attended to. We know of no other way to do this but to go back to the “HONOR SYSTEM.”

In reading this notice I agree that:

1) I WILL NOT ATTEMPT TO BUILD A QEG UNLESS I DO SO APPROPRIATELY WITH AN
ELECTROMECHANCIAL ENGINEERING PROFESSIONAL.

2) I WILL NOT COMMISSION (TURN ON) OR INSTALL THE QEG WITHOUT AN
ELECTROMECHANICAL ENGINEERING PROFESSIONAL.

3) UNDER THE ABOVE CONDITIONS, I MAY USE THE QEG INSTALLATION INSTRUCTIONS FOR
PERSONAL USE, AND UNDERSTAND THE NEED FOR IMPECCABLE COMMITMENT TO THE
BETTERMENT OF HUMANITY. IN THE BEST INTEREST OF THE PEOPLE OF PLANET EARTH, I
WILL NOT ATTEMPT TO MISUSE OR MONOPOLIZE THE QEG INSTALLATION INSTRUCTIONS IN
ANY CAPACITY, NOR WILL I ATTEMPT TO MAKE A HUGE PROFIT AT THE EXPENSE OF ANOTHER
HUMAN BEING.

IMPORTANT – Please make certain that persons who are to use this equipment thoroughly read and understand these instructions and any additional instructions prior to construction, installation and operation. In addition, we require you to read this notice again when you are ready to assemble the core.

Letter from the Editor

3-25-2014

Dear Builder,

It is no easy task to build the QEG, and we want to encourage you by offering a short treatise on
the importance of ‘consciousness’ in this endeavor. Many are becoming more familiar with
Nikola Tesla, his desire for all people to have access to free energy, and his failed attempt to
expose this technology to the world. Many have followed him with the same aspirations and,
similar to Tesla’s plight, have also been prevented by powers beyond their control. The “free”
energy movement is rife with horror stories ranging from government theft of patents, to
reputations destroyed, to the murder of untold numbers of brilliant scientists/inventors.

We must all consciously and constantly rise above these tyrannical infringements, and create an
environment for ourselves and our neighbors, and rediscover Nature’s Laws to be able to live
and thrive. We must leave off responding in incredulity to what was “done to us” when we were
told and believed we couldn’t create free energy. We are now awake to the point that we know
they were lying. Who’s they? The elite for starters – follow the money (watch THRIVE); J.P.
Morgan couldn’t put a meter on an energy plan for the world, and so destroyed any chance of
that happening through several vicious attacks on Tesla’s reputation and livelihood – basically
got Tesla’s ideas out of the way for his own profit and power – and maliciously destroyed the
man (youtube: Tesla’s Autobiography). While the electric companies have told the people theirs
is the only way to get electricity, and we are dependent on them, the truth is that we have been
deprived of this alternative (quantum) energy source for close to 130 years. Morgan’s grip on the
energy supply has not loosened one bit in all that time, in fact, you are probably paying more for
electricity than ever before, all things being equal.

So how do we effect our future now, and free ourselves and the generations to come after us
completely from energy tyranny? Building the QEG is one way. It is a journey that requires you
think deeply about processes that will, in turn, expand your senses to enable you to receive
information from the quantum field of consciousness, or God if you prefer this reference. We
believe we had Divine inspiration and help, which began with a burning desire to “get off the
grid” and also do something significant for humanity. The timing is wonderful because, as of the
writing of this, the entire planet is in turmoil as never before, and people will need to not only be
self-sufficient, we will all need to live according to what is good for all (Ubuntu), and help each
other for our continued evolution as species/planet.

It is with great love that the QEG is offered to the world, and as you take on the task of building
one, it is hoped that this becomes your path also: the mission of free energy for all! The next step
we ask you to take on your journey, before and during building, is to listen to the discussion
here: http://www.youtube.com/watch?v=3FqzTW7q ... e=youtu.be with HopeGirl,
Ralph and Marsha Ring, Fernando Vossa and the 3D Global Network.

I am, in service to Gaia and its inhabitants, deeply grateful for this technology, and the
opportunity to share it!

Valerie Robitaille


IMPORTANT ADDITIONAL INFORMATION

We are not professional writers or photographers and didn’t always have opportunities to document or photograph every step of development. Therefore, please take the level of engineer/electrical experience required to build a QEG very seriously as we are giving these to you under this premise. You will discover the advanced level of knowledge of mechanical/electrical processes needed quickly enough. The correct construction of the QEG requires patience and careful thought. We made several mistakes in development and have given here the steps that were successful. You will probably still make mistakes – and these will be your greatest learning opportunities as you gain more knowledge about this type of energy.

Before beginning to build, consider how much you would like to outsource to one of the cottage industry community units (CICUs) near you! In the US we recommend Polaris for the steel stator/rotor construction, and Torelco for toroidal winding. As FTW continues to roll out the distribution plan, and more connections across the world are made, we think CICUs will be commonplace and hence, QEG parts accessible (many people will be making them!)

When website URLs were available we provided links for the person reading this online. You may certainly use your own sources for materials but it is imperative you do not alter the instructions/parts herein if you are building a QEG. (We know with increased knowledge you will discover many applications for this technology.) When photographs can be shown to help you visualize a process, they are provided. Please remember, we are not professional manual writers. What we offer you here is free of charge and our gift to humanity – but it comes with great responsibility. Learn as much as you can, use discernment and wisdom, share freely, and you will be privileged to know the secrets of energy creation from the quantum field.

We would like to dedicate the success we’ve experienced to our first teacher, Sir Timothy Thrapp, and WITTS Ministries, without whose guidance none of this would be available so soon. We acknowledge and honor the work WITTS has done for over 200 years bringing technology forward, and hope that you will consider making a donation to the ministry for their great work.

We would also like to thank our greatest teacher and fellow humanitarian, Nikola Tesla. It is our most gratifying honor to present modern plans for a quantum energy generator to the world, based on Tesla’s discoveries, especially at a time when we the people are being manipulated and controlled by a corrupt energy economy. Tesla wanted everyone on the planet to have energy. We continue to carry out his vision.
free_energy_device_schematic.png
free_energy_device_schematic.png (103.81 KiB) Viewed 1049 times
free_energy_device_parts_1of2.png
free_energy_device_parts_1of2.png (121.4 KiB) Viewed 1049 times
free_energy_device_parts_2of2.png
free_energy_device_parts_2of2.png (107.14 KiB) Viewed 1049 times
free_energy_device_parts_sources.png
free_energy_device_parts_sources.png (100.5 KiB) Viewed 1049 times
MAJOR GENERATOR COMPONENTS
  • Stator
  • Rotor
  • Bearings
  • V belts
  • Capacitors
  • External exciter coil
  • End panels/plates
  • Magnet wire
  • Drive motor
  • Control box
  • Frame and packaging
  • Variac
  • Inverter
  • Pulleys

golly
Site Admin
Posts: 291
Joined: Mon Oct 29, 2018 11:14 am
Location: Hohokam / Piipaash / Apache / O'odham / Pueblo / Mexico / Arizona

Gender

Skin

Sexuality

Belief

Political

QEG manual part 2

Post by golly »

THE STATOR, or generator core, is made using 140 laminations of 24 gauge M19 C5 electrical steel forming a stack of 3 - 1⁄2 inches, with a 4 pole configuration. Corresponding ROTOR with 2 poles. Both STATOR and ROTOR are tig welded in 4 places.
01_the_stator.png
01_the_stator.png (105.14 KiB) Viewed 1047 times
02_the_shaft.png
02_the_shaft.png (60.47 KiB) Viewed 1047 times
03_the_shaft.png
03_the_shaft.png (92.36 KiB) Viewed 1047 times
End Plates

Fiberglass reinforced epoxy laminate (FR-4/G10) is used for end plate construction. End plates must be
constructed of insulating material, but must also be structurally strong as they support all generator components,
including bearings, shaft, rotor and stator. FR4 is the same material used to make circuit boards and is very
strong, machinable, and dimensionally stable. Dimensions: End Plates: .500” Thk. G10/FR-4 15” X 16.5” with
15” radius and 2.450” center hole.
04_end_plates.png
04_end_plates.png (210.86 KiB) Viewed 1048 times
Bearings

The bearings should have a narrow inner ring with set screws for attaching to the shaft. Housing is cast
iron with a grease zerk for re-lubing the bearing. We used a 3-bolt flange type mount, but 2-hole or 4-
hole can also be used. Bearings are mounted on the inside of the end plates toward the rotor.


Capacitors

The capacitors are a critical part of the system. The initial configuration on our prototype uses 12 caps,
2.5uF (microfarad) each. Each cap is rated for 2000V. These capacitors are wired in series in order to be
able to withstand up to 25,000V in the primary circuit. The value and quantity of these capacitors will be
adjusted to tune the frequency of the generator.


Variac

The variac is used to control the drive motor speed which effectively controls the system power. It’s
used during construction/tuning, and prior to self-running set-up when it can be replaced with the
smaller, lighter electronic motor drive circuit board.


Drive motor control circuit board

The drive motor control circuit board is an industry standard SCR type DC motor drive manufactured by
KB Electronics. The control board can be mounted in the console box we have included in the parts list,
and is provided with a speed control potentiometer for adjusting motor speed.


End Plate Layout

We used the bare core as a template to drill all the core mounting holes in the proper locations on the
end plates. After end plates are cut and finished, place one on a flat work surface that will support 100
lbs. Place the bare core over end plate, aligning the center bore of the core with the center hole in the
end plate. Make sure the pole pieces are right to the edge of the radius at the top of the end plate. We
used an extra long drill bit to drill the 8 mounting holes. Repeat this process for the other end plate.
Alternately, a long pin could be used as a center punch to mark hole locations and drill the holes using a
drill press. If using the core as a template be sure to make assembly marks on the core and the end plate
so that final assembly will have all the parts in the same orientation and the mounting bolts will go
through without binding. Be sure to mark the in-facing and out-facing sides of each panel.

golly
Site Admin
Posts: 291
Joined: Mon Oct 29, 2018 11:14 am
Location: Hohokam / Piipaash / Apache / O'odham / Pueblo / Mexico / Arizona

Gender

Skin

Sexuality

Belief

Political

QEG manual part 3

Post by golly »

CORE ASSEMBLY

This is the time to review the NOTICE and section on consciousness at the beginning.

We highly recommend ordering your generator set (stator and rotor) from an experienced professional lamination house. When your stator/rotor is welded and drilled, you are ready to bolt down the 8 spacers and wrap the core with 2 types of tape: Wrap 2 layers mica tape around the steel core (round part) followed by 1 layer of 1” reinforced, high-strength black tape. These 3 layers will bring the thickness needed for insulation to 17 mil (be very mindful at the corners of the pole pieces making certain there is no opening in the insulation for the wire to fall down into contact with the steel. If this happens, the coil will be short-circuited).
05_mica_plates_cuts.png
05_mica_plates_cuts.png (219 KiB) Viewed 1045 times
Installing Mica Plates

After you’ve cut 16 c-shaped mica plates, install them on the top and bottom of each pole piece (front and back). We used a small amount of contact cement to hold them in place for the rest of the processing, but they can also be taped in place with the reinforced black mylar tape. These are installed after core taping and before winding.

Wiring

You will need to commission a toroidal winding service. They might agree to process the entire core if you supply the materials (mica tapes and plates, corner insulation, aluminum spacers, bolts, outer taping, etc.). Proper winding is critical. Teflon sleeving is installed on the first complete turn of each winding of the #20 wire, and fiberglass/PVC sleeving on the #10 wire. Two coils of 3100 turns each of #20 wire are wound o’n opposing sides (left and right), and 2 coils of 350 turns each of #10 wire on the other sides (top and bottom). Leave about 3 feet of wire at the start of each winding and also at the finish for lead wires. Use enough sleeving to make sure the lead wires are completely insulated where they come through the back end panel. Be sure to secure the finish leads of each coil so that they don’t unravel during handling.

Outer Wrap Taping

Wrap a single layer of 1” white fiberglass tape tightly and securely around each coil making sure that all
wire is covered and tape is butted up against the 4 pole pieces.

Generator Assembly Steps

Rotor/Shaft/Shroud Assembly

Drawings are provided for the shaft showing an optional spline operation that can be used to mount the rotor to the shaft, if desired. We used Loctite 648 industrial adhesive (with activator), which is effective with close fitting parts.

Drill a 7/8” center hole, and two 1⁄4” mounting holes into the shroud disks (mounting holes are lined up with the holes in the rotor). Slide one disk onto the shaft on each side of the rotor. Bolt both shrouds to the rotor using two 4” or 4-1/4” long 1⁄4 - 28 through-bolts and nuts. These bolts should not be anylonger than necessary or a rotor imbalance can occur.

Shrouds are used to quiet the windage noise generated by the spinning rotor.

Bearings

Mount bearings to the inside of the front and rear end plates. Center each bearing on the 2.450” hole in the center of the plate. Drill the holes oversize for the mounting bolts. This is done to provide adjustability in the position of the shaft at final assembly. The bearings will have to be moved slightly to
center the rotor in the bore of the generator. The gap between rotor and stator is very small (.010”) and the rotor will need to be positioned so it does not rub on the stator bore. Only tighten finger tight at this time.

We opted to bring the leads from the coils out directly through holes drilled in the rear end plate. You may decide to bring the leads out a different way. Here are the steps for our method:

1) Insert all 8 bolts into the rear end plate, then lay the plate down on a flat work surface with the bolts pointing up. The work surface should have a hole under the center hole in the end plate to provide clearance when the rotor is inserted. About 1 1⁄2 inches of clearance is needed below the plate.

2) With an assistant or two, place the fully processed core (about 90 lbs.) down onto the bolts. Slide the core all the way down into contact with the end plate.

3) Insert the short end of the rotor/shaft/shroud assembly through the stator bore and into the rear bearing. Let the rotor assembly drop gently to the bottom and place the front end plate with bearing over the bolts and shaft end. Tap into place with rubber mallet if necessary. Once plate is in contact with stator assembly, install washers and nuts and tighten securely.

4) With assistance, place the assembly upright onto the raised portion of the base. We used 5 lag bolts across the bottom of the end plates on each side to mount the assembly to the wood base/frame. Other methods could be employed.

5) Mount the drive motor to the base/frame. We mounted the shaft end of the motor onto the aluminum angle on the front of the base with one bolt to provide adjustability for belt tightening. We built a sliding mount for the rear of the motor using sheet metal parts, but sliding motor bases are commercially available that provide adjustability for proper belt tensioning.

6) When the motor is mounted to the base, install 3” pulley on motor shaft using set screws.

7) At this point the rotor position should be adjusted so that it spins freely inside the core without rubbing. This is where you may need to adjust the bearing positions repeatedly until the rotor spins freely. (The gap between the rotor and stator is .010” making this step a little delicate.) however, once the rotor is tightened in position it does not tend to move. Place the 2 1⁄2” pulley on the generator shaft at this time; it can be used to turn the rotor by hand while adjusting its position.

8) Place the V-belt over both pulleys and position pulleys as close to the motor and the generator as possible. Both pulleys should be positioned an equal distance from the faces of the motor and generator to assure that the belt runs true.

9) The variac can be mounted on the base at this time. We used two 1/4 – 20 x 1” bolts with nuts to mount the variac to the aluminum angle. After all the components are mounted on the base, wiring and testing will be performed using the variac. (After set-up and testing is completed, the variac can be replaced with the electronic motor control circuit board for less bulk and weight. The console box in the parts list can be used as an enclosure/control panel for the motor speed control board, and for mounting the DPDT start/run switch.)

10) With all components mounted on the base, wiring can begin. Please follow the schematic to make connections. We mounted a 4” x 4” electrical box on the base to support a large (50 Amp) receptacle to bring the power out of the generator.

Wiring Notes: The generator output can be wired in series (220, 230-240V), or parallel (110, 115, 120V). For the series connection shown on the schematic, the start leads from each coil are connected together. This connection provides the highest voltage output from the windings. If using a parallel connection for lower voltage/higher current, be careful to connect the four leads with polarity opposed (start lead of one coil connected to finish lead of other coil).

The variac we used can be wired for 120 or 240 volt input, and provides 0-280 volts output, at up to 9.5 amps. This is a versatile variac and can be used with either a 120 or 240 volt system. The output of the variac is connected to a 600 volt, 25 Amp full-wave bridge rectifier to power the variable speed DC
drive motor.

Set-up and testing

Starting with the wiring setup as shown in the schematic, disconnect the primary coils from the series capacitor string on one end (disconnect capacitors). This will prevent resonance momentarily.

Connect input power to the variac. We started with a full 240 volt series wired system, but parallel 120 volt wiring can also be used.

Test mechanical assembly by spinning up the motor/rotor/belt and observing operation. Adjust variac voltage from zero to about 3⁄4 through its range. The active rpm range is under 2500 rpm, so we don’t need to spin very fast. Assure there is no stack rub (rotor scrubbing on stator), or other mechanical issues that need to be corrected for smooth operation.When proper mechanical operation is assured, re-connect the series capacitor bank. The initial configuration of 12 (twelve) 2.5 uF, 2000 volt capacitors gives us .208uF, that will withstand up to 24,000 volts. This initial value should be in the range to produce resonance.

As the machine spins up to resonance, the sound will change, and the rotor speed will lock into the resonant frequency. At this point any further increase of the motor speed control will change the speed only slightly, but the additional mechanical power (horsepower) will drive the core deeper into resonance, thereby increasing the power output. With a single control, the voltage and current (power) can be increased or decreased.

As previously mentioned, the exciter coil is used to provide a conduction path through the quantum field (zero point) into the generator core. This has the effect of polarizing the core, which increases power output over time. After the QEG is first built, the spark gap on the exciter coil should be adjusted (with power off) to between .005” and .010”. Start the generator and let it spark for 2-3 seconds, and repeat this 4 or 5 times. Do this whenever starting the generator for the first few weeks of operation.

golly
Site Admin
Posts: 291
Joined: Mon Oct 29, 2018 11:14 am
Location: Hohokam / Piipaash / Apache / O'odham / Pueblo / Mexico / Arizona

Gender

Skin

Sexuality

Belief

Political

QEG manual conclusion

Post by golly »

pics_01.png
pics_01.png (830.64 KiB) Viewed 1044 times
pics_02.png
pics_02.png (1.11 MiB) Viewed 1044 times
pics_03.png
pics_03.png (1.04 MiB) Viewed 1044 times
pics_04.png
pics_04.png (819.63 KiB) Viewed 1044 times
pics_05.png
pics_05.png (1.07 MiB) Viewed 1044 times
pics_06.png
pics_06.png (1.08 MiB) Viewed 1044 times
pics_07.png
pics_07.png (914.75 KiB) Viewed 1044 times
pics_08.png
pics_08.png (940.39 KiB) Viewed 1044 times
pics_09.png
pics_09.png (660.16 KiB) Viewed 1044 times
pics_10.png
pics_10.png (852.03 KiB) Viewed 1044 times
pics_11.png
pics_11.png (817.87 KiB) Viewed 1044 times
pics_12.png
pics_12.png (533.78 KiB) Viewed 1044 times
pics_13.png
pics_13.png (415 KiB) Viewed 1044 times
Frequently Asked Questions
- Where is the energy this device is using coming from ?
The quantum field

- How much overall power does the QEG produce?
10 KW (same design scaled up can produce 40 KW)

- If ‘free’ energy devices work, why aren’t the electric companies using them?
This should be obvious but in case you need a reference, please see:
http://hopegirl2012.wordpress.com/

- How is the QEG started up if it doesn’t require fuel?
All that’s needed is to spin the machine up to resonance. At that point it will run itself. It can be started using existing electrical power if available, or a crank mechanism, or a battery powered motor-start system. A battery start system could also keep its own batteries fully charged, by tapping some power from the generator.

- How long will the QEG run?
Indefinitely (or until parts wear out)

- How did the QEG improve upon Tesla’s work?
This design adapts the linear, reciprocating element of the Patent, to a rotating element, and some electronics are employed for added stability; controlled amount of power and correct frequency range.

- Does the QEG slow down when more of a load is added?
No – it’s not that type of energy.

- Does the QEG emit radiation?
No – it’s not that type of energy.

What form of energy does QEG use?
Electromagnetic and atmospheric charge

Willing
Introduced
Posts: 16
Joined: Mon Oct 29, 2018 7:36 pm
Location: Dakota Country

Re: Free Energy Devices

Post by Willing »

This takes me into a very new place. I thank you for submitting this. My body is reacting to the information in this with many curious making signals. I am getting distracted by those signals and am having a difficult time comprehending the details in the article. I think that I am having a bit of a challenge because I used to read Popular Mechanics and other science journals with an interest that was childlike and hopeful. I am getting a little glitchy getting pulled back into that sense of wonder and awe by this piece. "Can it be true?" was often the question I used to have..."How exciting!" was the feeling I used to get...

golly
Site Admin
Posts: 291
Joined: Mon Oct 29, 2018 11:14 am
Location: Hohokam / Piipaash / Apache / O'odham / Pueblo / Mexico / Arizona

Gender

Skin

Sexuality

Belief

Political

Re: Free Energy Devices

Post by golly »

I wonder if it's possible too.

According to Dan Willis (of thewebmatrix.net) there was a 1951 "Inventions Secrecy Act" having to do with Nazi infiltration of the USA government; such that anyone who tried to pass these inventions through a patent office would get slapped with something like a cease and desist due to alleged threats to national security.

However, these patents I am posting here have been floating around for many years or even decades and I guess they don't feel these are all that problematic. I would guess this is because free energy in the form of the QEG motor that, for example, powers a house or a car, is not all that frightening to defensive types, but there are other free energy devices that are much more powerful and disturbing to power balances. And those will probably not appear in the public for a while (until all the countries and nations stop threatening and hurting one another).

Also, as another possibility to consider, I think there are plenty of patents out there that could be utilized as weapons, but they are not being used as that, because people are not generally as ill-willed as militaries feel they have to fear (and/or good forces have managed to quietly disrupt nefarious plans). We may occasionally encounter a Bill Gates or Anthony Fauci type who thinks that making bioweapons and releasing them into the public is a great idea for personal business and pleasure but perhaps that kind of individual is being "exposed" at the moment, and we won't have such psychopathic behavior unleashed on people any longer.

Post Reply